# Can't use FR24 port 30334
**URL:** https://adsbx.discourse.group/t/cant-use-fr24-port-30334/895
**Category:** Technical Support
**Created:** [February 17, 2025, 8:08pm UTC](https://adsbx.discourse.group/t/cant-use-fr24-port-30334/895 "2025-02-17T20:08:02Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@dontic](https://adsbx.discourse.group/u/dontic)
#### Post date: [February 17, 2025, 8:08pm UTC](https://adsbx.discourse.group/t/cant-use-fr24-port-30334/895/1 "2025-02-17T20:08:02Z")
I tried following the official guide here to feed data from my existing FR24-supplied receiver to ADSB exchange. [Feed using data from FR24 supplied receiver · ADSBexchange/wiki Wiki](https://github.com/ADSBexchange/wiki/wiki/Feed-using-data-from-FR24-supplied-receiver)
The problem is that fr24 closed port 30334 a while ago as per: [Unable to get feed from FR24 receiver - Flightradar24 Forum](https://forum.flightradar24.com/forum/radar-forums/flightradar24-feeding-data-to-flightradar24/215028-unable-to-get-feed-from-fr24-receiver)
Seems that they left port 30003 open with “basestation” data, but I found nothing regarding this input type:
```auto
PORT STATE SERVICE VERSION
30003/tcp open basestation ADS-B flight data
```
Is there an updated guide on how to do this?
---
### Author:  [@CommGuy](https://adsbx.discourse.group/u/CommGuy)
#### Post date: [March 6, 2025, 4:02pm UTC](https://adsbx.discourse.group/t/cant-use-fr24-port-30334/895/2 "2025-03-06T16:02:50Z")
Yes those are very old instructions, just use the ones on the website.
> **[Existing Equipment - ADS-B Exchange](https://www.adsbexchange.com/ways-to-join-the-exchange/existing-equipment/)**
>
> Share your ADS-B data with ADSBexchange.com benefit the tracking community!
---
### Author:  [@dontic](https://adsbx.discourse.group/u/dontic)
#### Post date: [March 6, 2025, 5:13pm UTC](https://adsbx.discourse.group/t/cant-use-fr24-port-30334/895/3 "2025-03-06T17:13:26Z")
Ok gotcha. The problem is that those instructions asume you can SSH into other providers’ hardware (FR42, Flightaware, etc.) and I don’t think that’s even possible.
So my question is, is sharing ADSB data via using any emitting ports on those devices not possible anymore?
---
### Author:  [@CommGuy](https://adsbx.discourse.group/u/CommGuy)
#### Post date: [March 6, 2025, 5:16pm UTC](https://adsbx.discourse.group/t/cant-use-fr24-port-30334/895/4 "2025-03-06T17:16:19Z")
You can try bringing it up on the discord server, lots of smart people there. But unfortunately FR24 does not publish their changes and technically using their hardware to feed others is against their TOS so ADSBx has no control over if they make that possible.