# Feed.adsbexchange.com

**URL:** <https://adsbx.discourse.group/t/feed-adsbexchange-com/888>\
**Category:** Technical Support\
**Created:** [February 13, 2025, 7:07pm UTC](https://adsbx.discourse.group/t/feed-adsbexchange-com/888 "2025-02-13T19:07:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![damp.fly](https://avatars.discourse-cdn.com/v4/letter/d/9fc29f/32.png) [@damp.fly](https://adsbx.discourse.group/u/damp.fly)\
**Post date:** [February 13, 2025, 7:07pm UTC](https://adsbx.discourse.group/t/feed-adsbexchange-com/888/1 "2025-02-13T19:07:53Z")

</div>

Hi,

Managed to get the “BETA Release” installed on the SD Card and running on my “Raspberry Pi 3 Model B Plus Rev 1.3” today, big thank you to all that put it together.

For personal reasons I block on my firewall all Amazon IP’s and when visiting [ADSBexchange Anywhere](https://adsbexchange.com/myip/) I got "not feeding message, so checked the following:

```auto

sudo systemctl status dump978-fa.service
sudo systemctl status tar1090.service
sudo systemctl status tar1090-978.service
sudo systemctl status adsbexchange-stats.service
sudo systemctl status adsbexchange-feed.service
sudo systemctl status adsbexchange-mlat.service
sudo systemctl status readsb.service

```

and noticed that "[feed1.adsbexchange.com](http://feed1.adsbexchange.com) " could not be reached and that it’s now hosted on Amazon.

Are you able to make public all the IP ranges, so I could enable these on my FW?

---

<div class="post-metadata">

**Author:** ![demetrio](https://avatars.discourse-cdn.com/v4/letter/d/cab0a1/32.png) [@demetrio](https://adsbx.discourse.group/u/demetrio)\
**Post date:** [February 16, 2025, 8:45pm UTC](https://adsbx.discourse.group/t/feed-adsbexchange-com/888/2 "2025-02-16T20:45:18Z")

</div>

I am checking with engineering on this one. will get back to you.