# Need help: "Connected!" but no aircraft displayed and Stats = 0

**URL:** <https://adsbx.discourse.group/t/need-help-connected-but-no-aircraft-displayed-and-stats-0/399>\
**Category:** Technical Support\
**Created:** [March 9, 2024, 6:20pm UTC](https://adsbx.discourse.group/t/need-help-connected-but-no-aircraft-displayed-and-stats-0/399 "2024-03-09T18:20:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![BfloDoc](https://avatars.discourse-cdn.com/v4/letter/b/f14d63/32.png) [@BfloDoc](https://adsbx.discourse.group/u/BfloDoc)\
**Post date:** [March 9, 2024, 6:20pm UTC](https://adsbx.discourse.group/t/need-help-connected-but-no-aircraft-displayed-and-stats-0/399/1 "2024-03-09T18:20:10Z")

</div>

Running AirNav RadarBox with their FlightStick SDR on RPi 3B with bullseye without any problems for months.  
Wanted to contribute to ADS-B Exchange. Installed software and used identical location and antenna height as with RadarBox. After install at [ADSBexchange Anywhere](https://www.adsbexchange.com/myip/) I see “Thanks for feeding”, “ADS-B Connected!” and “Feed Ok”, and “MLAT Not Found”. Have rebooted RPi and re-installed adsbx but map still without any aircraft while RadarBox map is very active.  
Would welcome any thoughts on how to proceed.  
Thanks in advance.

---

<div class="post-metadata">

**Author:** ![dseven](https://avatars.discourse-cdn.com/v4/letter/d/d07c76/32.png) [@dseven](https://adsbx.discourse.group/u/dseven)\
**Post date:** [March 10, 2024, 12:09pm UTC](https://adsbx.discourse.group/t/need-help-connected-but-no-aircraft-displayed-and-stats-0/399/2 "2024-03-10T12:09:57Z")

</div>

“installed sofware” is a bit vague - did you follow [Existing Equipment - ADS-B Exchange](https://www.adsbexchange.com/ways-to-join-the-exchange/existing-equipment/) ? I’m not familiar with the radarbox setup, so not sure what you’d be starting with. `journalctl -u adsbexchange-feed.service` might provide some insight…

---

<div class="post-metadata">

**Author:** ![djmarko413](https://avatars.discourse-cdn.com/v4/letter/d/85f322/32.png) [@djmarko413](https://adsbx.discourse.group/u/djmarko413)\
**Post date:** [March 10, 2024, 7:40pm UTC](https://adsbx.discourse.group/t/need-help-connected-but-no-aircraft-displayed-and-stats-0/399/3 "2024-03-10T19:40:54Z")

</div>

On the ADSBExchange Anywhere page did you click on the right section where it says “ADSBx Anywhere Map”? That should take you to your map page with your aircraft.

---

<div class="post-metadata">

**Author:** ![BfloDoc](https://avatars.discourse-cdn.com/v4/letter/b/f14d63/32.png) [@BfloDoc](https://adsbx.discourse.group/u/BfloDoc)\
**Post date:** [March 10, 2024, 8:28pm UTC](https://adsbx.discourse.group/t/need-help-connected-but-no-aircraft-displayed-and-stats-0/399/4 "2024-03-10T20:28:05Z")

</div>

Yes, those are the instructions I followed to install the adsbexchange feed client. I’ll see what information is forthcoming from the command you suggested. Thanks.

---

<div class="post-metadata">

**Author:** ![BfloDoc](https://avatars.discourse-cdn.com/v4/letter/b/f14d63/32.png) [@BfloDoc](https://adsbx.discourse.group/u/BfloDoc)\
**Post date:** [March 10, 2024, 8:29pm UTC](https://adsbx.discourse.group/t/need-help-connected-but-no-aircraft-displayed-and-stats-0/399/5 "2024-03-10T20:29:31Z")

</div>

I did click on the section to launch the map but it continues to show zero aircraft. Thanks.