# Own receiver position in MLAT feeder map **URL:** \ **Category:** Feeding\ **Created:** [November 25, 2024, 10:25am UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751 "2024-11-25T10:25:44Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Janoz53](https://avatars.discourse-cdn.com/v4/letter/j/97f17d/32.png) [@Janoz53](https://adsbx.discourse.group/u/Janoz53)\ **Post date:** [November 25, 2024, 10:25am UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/1 "2024-11-25T10:25:44Z")
I can not see my receiver position in the ADSB Feeder map ([ADSBexchange.com Feeder Coverage](https://map.adsbexchange.com/mlat-map/)). In the “local” tracking map (own ip/tar1090) the position is displayed correct. How can I set this position in the ADSB Feeder map? ---
**Author:** ![dseven](https://avatars.discourse-cdn.com/v4/letter/d/d07c76/32.png) [@dseven](https://adsbx.discourse.group/u/dseven)\ **Post date:** [November 26, 2024, 11:02am UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/2 "2024-11-26T11:02:00Z")
If you’re using the ADSBx pi image, there’s an option at [http://adsbexchange.local/config/](http://adsbexchange.local/config/) for whether or not your position marker gets shown on the MLAT map. Of course this depends on MLAT working properly, so check [ADSBexchange Anywhere](https://www.adsbexchange.com/myip/) too ---
**Author:** ![Janoz53](https://avatars.discourse-cdn.com/v4/letter/j/97f17d/32.png) [@Janoz53](https://adsbx.discourse.group/u/Janoz53)\ **Post date:** [November 26, 2024, 11:53am UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/3 "2024-11-26T11:53:59Z")
I am using the ADSB pi image, but I can not open the [http://adsbexchange.local/config/](http://adsbexchange.local/config/). If I open ADSBexchange Anywhere there some (few) MLAT tracks. /Jan ---
**Author:** ![dseven](https://avatars.discourse-cdn.com/v4/letter/d/d07c76/32.png) [@dseven](https://adsbx.discourse.group/u/dseven)\ **Post date:** [November 26, 2024, 12:10pm UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/4 "2024-11-26T12:10:32Z")
If your client doesn’t support mDNS, replace “adsbexchange.local” with the IP address of your feeder. ---
**Author:** ![Janoz53](https://avatars.discourse-cdn.com/v4/letter/j/97f17d/32.png) [@Janoz53](https://adsbx.discourse.group/u/Janoz53)\ **Post date:** [November 26, 2024, 12:32pm UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/5 "2024-11-26T12:32:50Z")
That does not work (404 Not Found). I should mention that I am running FR24, Radarbox and PiAware on the same Pi as ADSB Exchange. ---
**Author:** ![dseven](https://avatars.discourse-cdn.com/v4/letter/d/d07c76/32.png) [@dseven](https://adsbx.discourse.group/u/dseven)\ **Post date:** [November 27, 2024, 11:21am UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/6 "2024-11-27T11:21:39Z")
Then you’re probably not using the ADSBx Pi image. Check the file `/etc/default/adsbexchange` for the `MLAT_MARKER` setting. Also confirm that you see MLAT Connected at [https://www.adsbexchange.com/myip/](https://www.adsbexchange.com/myip/) ---
**Author:** ![Janoz53](https://avatars.discourse-cdn.com/v4/letter/j/97f17d/32.png) [@Janoz53](https://adsbx.discourse.group/u/Janoz53)\ **Post date:** [November 27, 2024, 12:57pm UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/7 "2024-11-27T12:57:07Z")
I can not see any MLAT\_MARKER setting. But I could see that I have accidentally set the Lat/Lon figures wrong; where and how can I correct this? I can see that the MLAT is connected in [https://www.adsbexchange.com/myip/](https://www.adsbexchange.com/myip/). I am very greatful for all the help from you. Regards Jan ---
**Author:** ![dseven](https://avatars.discourse-cdn.com/v4/letter/d/d07c76/32.png) [@dseven](https://adsbx.discourse.group/u/dseven)\ **Post date:** [November 28, 2024, 12:22pm UTC](https://adsbx.discourse.group/t/own-receiver-position-in-mlat-feeder-map/751/8 "2024-11-28T12:22:14Z")
Just edit that file, then run `sudo systemctl restart 'adsbexchange-*'`