# peers synchronized with multilateration **URL:** \ **Category:** Feeding\ **Created:** [December 31, 2024, 11:29pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805 "2024-12-31T23:29:50Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [December 31, 2024, 11:29pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/1 "2024-12-31T23:29:50Z")
Hello, I see that on the MLAT Feeder Map members are synchronized into peers. This is not my case, I have no synchronizations with people, is this a problem? everything is set correctly (coordinates, altitude,) my data is sent from FlightAware. ---
**Author:** ![CommGuy](https://yyz1.discourse-cdn.com/flex027/user_avatar/adsbx.discourse.group/commguy/32/21_2.png) [@CommGuy](https://adsbx.discourse.group/u/CommGuy)\ **Post date:** [December 31, 2024, 11:33pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/2 "2024-12-31T23:33:07Z")
If the myIP page says your MLAT is working then it probably means you don’t have great range so your not seeing enough planes that other feeders see to sync, the other issue could be timeout errors, likely caused by using a non official power supply. ---
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [January 1, 2025, 6:22pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/3 "2025-01-01T18:22:32Z")
Hello, I just checked everything is ok. In Myip ADSB- Connected!-feed ok MLAT- Connected!- feed ok. Airplane detection is good up to 130 MN and the delay is 0s (Feeder Timeout Penalty: 0s) the installation of piaware and adsbexchange are in proxmox containers so normally no problem with clock synchronization. I don’t see where the problem comes from. do you have any other ideas? ---
**Author:** ![CommGuy](https://yyz1.discourse-cdn.com/flex027/user_avatar/adsbx.discourse.group/commguy/32/21_2.png) [@CommGuy](https://adsbx.discourse.group/u/CommGuy)\ **Post date:** [January 2, 2025, 8:29pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/4 "2025-01-02T20:29:25Z")
Virtualization is not supported and can lead to all kind of weird issues. ---
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [January 2, 2025, 10:46pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/5 "2025-01-02T22:46:37Z")
ok, this means that peer feeders do not share the data feed, they have it directly with a raspberry pi and an AdsbExchange installation? is this the only way to be a peer feeder? ---
**Author:** ![dseven](https://avatars.discourse-cdn.com/v4/letter/d/d07c76/32.png) [@dseven](https://adsbx.discourse.group/u/dseven)\ **Post date:** [January 4, 2025, 9:57am UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/6 "2025-01-04T09:57:09Z")
Feeding other sites (and participating in their MLAT) is generally not an issue (provided sufficient compute resources to handle it), but virtualisation is an issue, as passing a USB device (SDR) through to a VM incurs timing delay, and the arrival time of the signal is critical to the way MLAT functions. It has nothing to do with clock synchronisation (as in NTP). ---
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [January 4, 2025, 11:17am UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/7 "2025-01-04T11:17:37Z")
Ok that means that even being in a LXC container there is latency. I thought that installing piaware in a LXC container instead of a virtual machine would remove this problem. ---
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [January 8, 2025, 11:09pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/8 "2025-01-08T23:09:54Z")
well I got my Raspberry pi 3 back. I’m going to try to mount my configuration on it and normally I should have a synchronization with peers? I’ll try. ---
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [January 12, 2025, 8:57am UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/9 "2025-01-12T08:57:39Z")
Hello, I noticed that the audit when there is less air traffic and therefore I no longer pick up planes nearby I have this message “No clock synchronization with nearby receivers” in the piaware status. Wouldn’t that be my problem? If I increase the quality of my installation. and I pick up planes further away at night, will that solve the problem? ---
**Author:** ![CommGuy](https://yyz1.discourse-cdn.com/flex027/user_avatar/adsbx.discourse.group/commguy/32/21_2.png) [@CommGuy](https://adsbx.discourse.group/u/CommGuy)\ **Post date:** [January 16, 2025, 11:24pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/10 "2025-01-16T23:24:41Z")
Correct, you can’t sync with other feeders if there are no aircraft around to sync with, refer to the very first response I made to your question. ---
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [February 8, 2025, 6:11pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/11 "2025-02-08T18:11:30Z")
Hello, I have installed the version of FA for 2 weeks on an RPI so no syncronistic problem of the time, the range is good (60 miles). Yet I still have no feeder. I don’t understand why? Should we have an official version of Adsbexchange? ---
**Author:** ![CommGuy](https://yyz1.discourse-cdn.com/flex027/user_avatar/adsbx.discourse.group/commguy/32/21_2.png) [@CommGuy](https://adsbx.discourse.group/u/CommGuy)\ **Post date:** [February 8, 2025, 7:01pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/12 "2025-02-08T19:01:43Z")
If you installed FA your not going to feed ADSB Exchange your going to feed FA… is your goal to feed both? ---
**Author:** ![Bobyby](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bobyby](https://adsbx.discourse.group/u/Bobyby)\ **Post date:** [February 8, 2025, 8:32pm UTC](https://adsbx.discourse.group/t/peers-synchronized-with-multilateration/805/13 "2025-02-08T20:32:36Z")
yes I would like to feed both. I find the statistics on FA are better