Cannot see my station on Leaderboard

Technical Support
1

Hello @all,

I cannot see data from my station on Leaderboard. Do I have to configure something?

Thank you in advance!

Best regards,

Bruno

2

You’d need to have the stats package installed. Check https://www.adsbexchange.com/myip/ (from the same public IP address as your feeder). Also I think if you have disabled “MLAT marker” (http://adsbexchange.local/config/ if you’re using the ADSBx Pi image), that might hide you from the Leaderboard too.

3

Hi @dseven, thank you for your response!

I use PiAware image and have MLAT disabled. Is that might be the reason.
Is it still possible to use / see the Leaderboard?

Thank you & regards,

Bruno

4

Probably. FWIW, the ADSBx Pi image can do MLAT with both ADSBx and FA at the same time. I don’t know if the piaware image does something to prevent you doing that.

5

I didn’t realize you could feed MLAT to two systems at the same time. The usual recommendation is to use only one, even though it’s technically possible. So in theory I could enable MLAT for both ADSBx and PA, right?